- Other Electrical Equipment[10]
- Other Machinery[1]
- Power Distribution Equipment[4]
- Pressure Switches[1]
- Remote Control Switches[1]
- Electronic & Instrument Enclosures[1]
- Transformers[7]
- Mining Machinery Parts[1]
- Other Switches[10]
- Push Button Switches[2]
- Energy Saving & Fluorescent[3]
- Electrical Plugs & Sockets[2]
- Connectors[1]
- Hydraulic Tools[6]
- Hydraulic Parts[1]
- Solar Energy Systems[1]
- Pliers[8]
- Other Tools[2]
- Other Hand Tools[8]
- Cable Ties[2]
- Scissors[1]
- Signal Generators[2]
- Timers[1]
- Gas Meters[7]
- Contact Person : Ms. Ke Carrie
- Company Name : Zhenda Technology Co., Ltd.
- Tel : 86-577-62667833
- Fax : 86-577-62665883
- Address : Zhejiang,Yueqing,Center Industry Zone, Yueqing City, Zhejiang Province. China
- Country/Region : China
- Zip : 325000
Signal Generator, Function Signal Generator
1. INTRODUCTION
This function generator can be used as function signal generator, sweep signal generator and pulse signal generator. (Only YD1603P, YD1620P with power amplifier). Which is widely used in the field of analog circuit and digital circuit, such as project, manufacture, service, experiment for teaching and research.
2. TECHNICAL PARAMETERS:
MODEL | 1603(1620P) | 1620(1620P) | ||||||||
Frequency range | ×1 0.1Hz~1Hz ×10 1Hz~10Hz ×100 10Hz~100Hz ×1k 100Hz~1kHz ×10k 1kHz~10kHz ×100k 10kHz~100kHz ×1M 100kHz~1MHz ×3M 300kHz~3MHz | ×1 0.1Hz~1Hz ×10 1Hz~10Hz ×100 10Hz~100Hz ×1k 100Hz~1kHz ×10k 1kHz~10kHz ×100k 10kHz~100kHz ×1M 100kHz~1MHz ×20M 1MHz~20MHz | ||||||||
Output waveform
| Function output | Sine, square and triangle symmetrical or unsymmetrical | ||||||||
TTL/CMOS output | Pulse wave (CMOS output f≤100kHz) | |||||||||
Sine wave distortion | ≤1% | |||||||||
Triangle wave linearity | >99%(output rang :10%~90%) | |||||||||
Pulse wave raise time | ≤30ns(YD1603(P)) ≤25ns(YD1620(P)) | |||||||||
Pulse wave raise over impulse | ≤5% ( impedance 50Ω) | |||||||||
Output impedance
| Function signal output | 50Ω | ||||||||
TTL/CMOS signal | 600Ω | |||||||||
External input frequency characteristic | impedance | About 500K | ||||||||
Signal range | 0V—+3V | |||||||||
Signal cycle | 10ms~5s | |||||||||
Signal style | Single frequency, sweep frequency,frequency modulation(controlled) | |||||||||
Symmetry degree range | 20%~80%,“off”will output symmetry waveform, error≤2% | |||||||||
DC bias | Continually adjustable-10V-10V ±10% (1MΩimpedance),-5V~+5V ±10%(50Ωimpedance),“off”will output DC Level <±0.1V | |||||||||
TTL output(load impedance≥600Ω) | “0”level | ≤0.8V | ||||||||
“1”level | ≥3V | |||||||||
CMOS output(load impedance≥2 KΩ) | “0”level :≤0.8V “1”level : 5V-15V continually adjustable | |||||||||
single fixed Frequency output | frequency | waveform | Output range | |||||||
100Hz±2Hz | Sine wave | ≈2Vp-p | ||||||||
Voltage output (1M load Resistance) | Without attenuation:(1.0Vpp~20Vpp)±10%(adjustable) attenuation 20dB: (100mVpp~2Vpp) ±10% (adjustable) attenuation 40dB: (10mVpp~200mVpp) ±10% (adjustable) attenuation 60dB: (1.0mVpp~20mVpp) ±10% (adjustable) | |||||||||
Range display | unit | Vpp or mVpp | ||||||||
error | Vo±20%±1 character(Vo : the peak value of output signal) Load resistance is 50Ω, Vo reading *1/2 | |||||||||
Differentiation rate | 0.1Vpp ( no attenuation), 10mVpp(attenuation 20dB), 1mVpp(attenuation 40dB),0.1mVpp(attenuation 60dB) | |||||||||
Power output frequency | 0.1Hz~100KHz | |||||||||
The max power. output voltage | 50VP-P | |||||||||
The max. power output current | 1AP-P | |||||||||
Power output current overload | Overload indication | |||||||||
Timebase nominal frequency | 24MHz | |||||||||
Frequency count | Frequency range | 0.1Hz~40MHz | ||||||||
Voltage range | 1Hz-40MHz 30mV-2V 0.1Hz-1Hz 150mV-2V | |||||||||
Impedance range | 500KΩ/30pF | |||||||||
Filter end frequency | About 100KHz (with inner attenuation to satisfy the min. voltage as requirement.) | |||||||||
Measure error | Time base error + Trig error(The SN rate of tested signal is better than 40dB with signal period)(trig error≤0.3%) | |||||||||
Power voltage | AC 220V±10% | |||||||||
Power frequency | 50Hz±2Hz | |||||||||
Dimension | L×B×H: 280×210×85 mm | |||||||||
weight | 2.5kg | |||||||||
Signal Generator, Function Signal Generator
